EXHAUSTION · FOR

Clean Finish ATAS indicator for finished auctions

An ATAS finished auction indicator that flags the exact bars where price ran out of aggressors at the extreme, marked with a clean high or clean low symbol.

Compatible withATAS & ATAS X
Footprint / cluster data feed Futures & crypto perps Tick · volume · range · Renko & more
$59.90
One-time purchaseLifetime updates
  • ATAS account activation
  • PDF guide included

Real ATAS capture. Open to inspect at full size.

01 / THE CONCEPT

At the final price rows.
An orderly finish.

The footprint’s outer rows can reveal activity tapering into an extreme, alongside opposing imbalance evidence. Clean Finish checks those details together.

The last levels carry the reading.Volume or delta tapering, with opposing traded evidence.
The outer footprint rowsCONCEPT VIEW
OUTER ROWS TAPERActivity thins toward the edgeOpposing imbalanceTraded evidence against the moveCHA finished extreme describes this bar, not the next move.
Buy-side evidenceSell-side evidenceClean marker
  1. Activity tapers upward

    The chosen measure gets smaller toward the exact high.

  2. Opposing imbalance

    Sell-side imbalance is present in the qualifying outer rows.

  3. A high is identified

    The completed reading is shown as a Clean High marker.

CH · a qualifying high finish

The finish describes how this auction ended; it does not forecast the next move.

Conceptual illustration, not market data or indicator output. Geometry and bar values are illustrative. Product settings and filters still apply. No future price path is shown.

Reading and timing. Closed-bar marks are final. With Signal on Close off (the default), a forming-bar mark can appear, disappear or change until the close. Enable it for completed-bar display. The selected measure and imbalance filters still apply.

Inspect the real chart
02 / THE CONTEXT

See the signal
in context.

A clean finish carries more meaning at a price you already care about. Here, a Clean Low at the edge of prior-session value is followed by a change in where the next bar does its heaviest business.

AN ILLUSTRATIVE SCENARIOA clean low at value. Then the POC moves higher.

The first bar describes the finish. The next completed bar adds the handoff.

A Clean Low at value, followed by an upward POC handoffSynthetic prior-session Value Area Low at 5011.00. Three earlier down bars approach the level. Bar 1 makes a fresh low and closes down, with tapering outer-row absolute delta and opposing buy imbalance at its low, marked by a gold Clean Low diamond. Its POC is near the low. The next completed bar holds that low, closes up and moves its own POC near its high, completing a green POC Flip square. The green upward arrow is a bullish case to evaluate, not a future candle.5,015.505,014.505,013.505,012.505,011.505,010.50APPROACH TO PRIOR-SESSION VALUE LOWSCENARIOVAL 5,011.00EARLIER SELLINGBAR 1CLEAN LOW AT VALUEBIDASKROW Δ24183121443237314637433739325445625784777866+504090+12120132+448POCCLΔ -23VOL 1,389BAR 2NEXT-BAR POC HANDOFFBIDASK29123592238711124888356726492143183922381934253731291610POCPFΔ +390VOL 1,266BAR 1not closed yetBAR 2not closed yetDIRECTIONALREADBULLISHCASEWATCH THERESPONSE?WAIT FORNEXT BARSYNTHETIC FOOTPRINT DATA · CLEAN LOW, THEN POC FLIP · TWO CONSECUTIVE COMPLETED BARS

Prior-session VAL 5,011.00 · Two consecutive completed bars. Swipe or enlarge to inspect.

01—03
Confluence strengthens the bullish case.

The first bar probes below prior-session value and finishes with a Clean Low. The next bar holds the low, closes up and relocates its POC near its high. The location, the finish and the later handoff build a bullish reading to assess against subsequent price action.

Illustrative scenario created from scratch. All values are synthetic. The gold Clean Low diamond belongs to Bar 1. The green POC Flip square confirms only after Bar 2 closes. No later outcome is shown. Clean Finish can update on a forming bar with its default settings; this example uses its completed reading.

The green arrow represents the directional case in this illustration. A clean finish can occur during a continuing trend; the next bar adds evidence, and the later market response can still invalidate the reading.

Read about value-area context ↗
WHY IT EXISTS

Not every extreme is an exhaustion point.

Plenty of extremes get made by momentum that just keeps absorbing, and a bar that pokes to a new high can still be full of aggressive buyers with more behind them.

Telling a price-ran-out-cleanly extreme from a still-loaded one on the raw footprint is slow, subjective and easy to get wrong in fast tape. Clean Finish does that read on every bar and only marks the ones that pass.

WHAT IT DOES

Built to do one job well.

Less guesswork at extremes

Only bars that genuinely taper into the high or low and show real opposite pressure at the edge get marked.

Two conditions, one glance

Multiple independent checks must both be true, weeding out noisy single-condition prints.

Directional and unambiguous

Clean highs print above the bar, clean lows below, in their own colors.

Tunable strictness

Keep only the most decisive finishes, or loosen it to see more.

HOW IT WORKS

Strict rules, no guesswork.

For each bar the indicator reads the footprint at both extremes and requires the activity to taper cleanly into the edge while genuine opposite pressure shows up in the outer prints.

Only when both conditions hold does a clean high or clean low marker appear. Very thin bars are skipped by design.

The detection logic itself is our work: refined on live tape, and the reason the tool is worth paying for. Sensitivity, filters, colors and display are all yours to tune.

STRAIGHT ANSWERS

When it helps, and when it won’t.

Built for

  • ✓Exhaustion reads at swing highs and lows
  • ✓Volume-driven bars with meaningful distribution
  • ✓Confluence with your levels, delta and structure
  • ✓Futures and most crypto perpetuals

Not built for

  • ✕Treating a mark as an entry by itself
  • ✕Thin, low-volume conditions with sparse footprints
  • ✕Trend and continuation trading
  • ✕Spot forex
FAQ

Questions, answered straight.

What data feed do I need?
ATAS connected to a feed that provides footprint/cluster data: real per-price bid and ask volume, like Rithmic or CQG. It works on futures, most crypto perpetuals and volume-based stocks. It is not usable on spot forex, which has no centralized volume.
Which chart types and timeframes work best?
Footprint/cluster charts give the cleanest read, and it also renders on candlesticks. Any bar type works: tick, volume, range, time, Renko, reversal and more. It is built for scalping and intraday trading.
Does it repaint?
With Signal on Close enabled, marks appear only when a bar has finished and then stay put. Without it, the forming bar is evaluated live and can update until close.
Can I combine it with my other order-flow tools?
Yes. It is designed as a confluence layer, so it sits cleanly alongside delta, imbalance, POC, VWAP and your own levels. It flags a condition; you decide how to trade it.
How do I get it running in ATAS?
After checkout we grant it to the ATAS account email you gave us, usually within a few hours. Then activate it once in ATAS: gear icon (top right) → Custom Modules → expand Available modules → activate. It then sits in your indicators list, ready for any footprint or cluster chart.
THE COMPLETE FOOTPRINT LAB COLLECTION

Order Flow Suite

20 order flow indicators.
One complete toolkit.

Bring momentum, absorption, reversals and price structure into your analysis. Get Clean Finish alongside the complete collection, with every future release included.

Order flow toolsIncluding all five new releases
  • Lifetime updates
  • Product guides included
  • Future releases included
YOUR COMPLETE TOOLKIT$499.90

One-time purchaseNo subscription

Bought individually: $1,198.00Save $698.10
Explore the Suite

Find the tools that fit
the way you read the market.

Ready when you are.

One payment, yours for life. Lifetime updates and a PDF guide included, no subscription.

Clean Finish / ATAS

Chart example

Clean Finish marking a clean high and a clean low with diamonds on an ATAS footprint chart
1 / 2

Original ATAS capture. Other visible chart studies are context; the image is an example, not an expected trading outcome.