ENTRIES & ZONES · FOR

Volume Sequencing ATAS order flow entry indicator, with zones for the retest

An ATAS entry indicator that marks the bar where aggressive buyers or sellers drove one-sided volume into an extreme, then keeps that zone on your chart for the retest.

Compatible withATAS & ATAS X
Footprint / cluster data feed Futures & crypto perps Tick · volume · range · Renko & more
$59.90
One-time purchaseLifetime updates
  • ATAS account activation
  • PDF guide included

Real capture: ES footprint with Volume Sequencing running. Hover to inspect.

01 / THE CONCEPT

Pressure builds.
A price band remains.

The footprint can reveal aggression increasing from one neighboring price level to the next. Volume Sequencing turns qualifying runs into areas you can keep in view.

From a sequence of trades to a visible zone.One source bar. A defined price range.
Increasing participationCONCEPT VIEW
BIDASKPROJECTED AREAAsk sequenceNo later bars shownONE FOOTPRINT BARIncreasing ask volumeAdjacent price levels → a defined area
Ask volumeBid volume
  1. Neighboring price rows

    A sequence needs adjacent levels, rather than scattered large prints.

  2. Volume builds upward

    The example shows increasing ask volume as buyers trade higher.

  3. An area stays visible

    The qualifying price range is projected forward for a later retest.

Ask-sequence zone

The band locates traded pressure. It does not promise that a later touch will hold.

Conceptual illustration, not market data or indicator output. Geometry and bar values are illustrative. Product settings and filters still apply. No future price path is shown.

Reading and timing. Zones originate from qualifying footprint sequences. Their extension and retest behavior follow your display settings.

Inspect the real chart
02 / THE CONTEXT

See the signal
in context.

A zone tells you where pressure built. A later return tells you how the market responds. Bring those two observations together.

AN ILLUSTRATIVE SCENARIOA buying zone. A first retest. A different kind of evidence.

The zone forms earlier. Delta Tail adds a reading when price comes back.

Volume Sequencing and Delta Tail: an illustrative first-retest contextInvented footprint example with a time gap. An earlier up-close bar builds a green ask-sequence zone from 5019.00 to 5019.50. Three intervening bars move above it without touching it. The first retest bar enters the zone and closes up, with a thin negative-delta tail at the low and positive per-price delta above it. A green DTS triangle marks the illustrative Delta Tail reading. The zone extension stops at that first retest. A dashed green upward arrow represents a bullish case to evaluate against subsequent price action.5,022.005,021.005,020.005,019.005,018.005,017.00SCENARIOASK-SEQUENCE ZONE5,019.00 — 5,019.50EARLIER BARBUYING BUILDS A ZONEBIDASK481830272540484634681554780353530481222POCΔ +158VOL 812BETWEEN THE TWO FOOTPRINTSMOVES AWAYthen returnsTIME GAP · NOT CONSECUTIVE BARSRETEST BARTHE FIRST RETURNBIDASK515153724683211245165389029521828327POCDTSTAILUP CLOSEThin opposing tailΔ +336VOL 812FIRST RETESTEXTENSION STOPSRETEST BARnot closed yetDIRECTIONALREADBULLISHCASEWATCH THERESPONSE?WAIT FORTHE RETESTINTERVENING BARSSYNTHETIC FOOTPRINT DATA · QUARTER-POINT PRICE ROWS · CLOSED-BAR STORY

Earlier zone → time gap → first retest. Swipe across the footprint, or enlarge it to inspect the numbers.

01—03
Confluence strengthens the bullish case.

Price returns to an area built by earlier buying pressure. The retest closes up with a thin opposing tail and positive per-price delta above it. Volume Sequencing provides the location; Delta Tail describes the response. Watch subsequent price action to confirm or invalidate the reading.

Illustrative scenario created from scratch. Prices, footprint values and output placements are synthetic. The two footprints are separated by intervening bars. The example uses closed-bar readings; product settings still apply.
THE TOOLS IN THIS EXAMPLE

The location, then the response.

A still-extending sequence zone is untested. Its extension stops at the first return; that is when the price and order-flow response become the next information to assess.

EARLIER PRESSUREVolume Sequencing

The green band retains the price area where a qualifying ask sequence formed on an earlier up-close bar.

Review the zone-building concept ↑
RETEST RESPONSEDelta Tail Signal

A thin opposing tail at the low sits beneath a positive-delta body on the up-close retest bar.

Explore the Delta Tail reading ↗

The green arrow shows the directional case suggested by this illustration. The zone and the marker describe different evidence; subsequent price action can confirm or invalidate the reading.

Read about absorption in context ↗
WHY IT EXISTS

Footprints show you everything. That’s the problem.

Spotting where aggression is actually building a level means eyeballing hundreds of tiny cluster cells, bar by bar. The moments that matter (real buying pressure driving into a high, real selling pressure driving into a low) are easy to miss in the noise, and they’re exactly the levels price tends to respect later.

Volume Sequencing watches every bar’s footprint for you and turns those moments into clean, visible zones. You don’t read raw clusters manually; you watch how price behaves when it comes back to a level that genuinely mattered.

WHAT IT DOES

Objective zones from actual traded order flow.

Instant, rules-based zones

A zone only prints when the order flow meets strict, pre-defined criteria, so every drawn zone means the same thing, on every chart, every session.

Levels from real bid × ask runs

Support and resistance built from what buyers and sellers actually did, not price geometry or hand-drawn lines.

Tested vs untested at a glance

Zones extend to the right and lock the moment price re-enters them: a live read on which levels still haven’t been tested.

Direction-aware by default

Ask zones only on up-bars, bid zones only on down-bars: genuine one-sided pressure, not noise. A confluence layer that drops into your existing workflow.

HOW IT WORKS

Strict rules, no guesswork.

Volume Sequencing reads the complete footprint of every bar (the real traded bid × ask at every price) and applies a strict, fixed set of detection rules to identify genuine one-sided aggression. Nothing subjective, nothing discretionary: either the order flow qualifies, or no zone prints.

With Wait For Bar Close enabled, zones are shown only after the source bar closes. With it off, a forming-bar zone can appear, change or retract until the close. Closed-bar zones keep their price band; an enabled extension locks on the first retest.

You stay in control of how strict it is: sensitivity, filtering, projection and colors are all yours to tune. The detection logic itself is our work, refined on live tape. It’s the reason the tool is worth paying for.

Settings you control

  • Detection sensitivityStricter or looser zones
  • Direction filterOn / off
  • Extend zonesProject until tested
  • Signal-bar outlineMark the detection bar
  • Lookback windowKeep long charts fast
  • Zone colorsBullish & bearish, fully custom
STRAIGHT ANSWERS

When it helps, and when it won’t.

Built for

  • ✓Scalping and intraday order-flow trading on footprint/cluster charts
  • ✓Objective S/R for entries, exits and targets: watch the re-test of a zone
  • ✓Confluence with your own levels, VWAP or session marks
  • ✓Liquid futures (ES, NQ, CL, GC…) and most crypto perpetuals

Not built for

  • ✕Spot forex: no centralized volume means no footprint to read
  • ✕Auto-trading: it marks the entry and the zone; the decision stays yours
  • ✕Higher-timeframe positioning: it’s an intraday tool
  • ✕Ultra-thin instruments where a few contracts print meaningless runs
NATIVE ATAS INTEGRATION

From checkout to chart in minutes.

STEP 1

Secure checkout

Pay securely by card, and tell us the email your ATAS platform logs in with.

STEP 2

We link your account

Volume Sequencing is granted to that ATAS account. No license keys, no files.

STEP 3

Activate in ATAS

Once, in two clicks: gear icon → Custom Modules → activate. It then sits in your indicators list.

STEP 4

Start trading

Zones draw automatically on your charts. Nothing else to configure.

FAQ

Questions, answered straight.

What data feed do I need?
ATAS connected to a feed that provides footprint/cluster data: real per-price bid × ask volume, like Rithmic or CQG. It works on futures, most crypto perpetuals and volume-based stocks. It will not produce meaningful zones on spot forex, which has no centralized volume.
Which chart types and timeframes work best?
Run it on a footprint/cluster chart for the cleanest cell-snapped zones. It also renders on candlesticks. Any bar type works: tick, volume, range, time, Renko, reversal & more. The sweet spot is the lower-timeframe, higher-resolution footprints scalpers use; the extend-and-lock logic lets a level hold into longer intraday swings.
Does it repaint?
Closed-bar zones are final. With Wait For Bar Close off (the default), a zone on the forming bar can appear, change or retract. Enable it for closed-bar-only display. The fixed price band’s forward extension continues until the first retest, then locks.
Can I combine it with my other order-flow tools?
Yes, it’s built as a confluence layer. Zones draw as a background tint behind your candles and clusters, so it sits cleanly alongside delta, imbalance, POC/VWAP and your own levels. It flags where aggression stacked; you decide how to trade the zone.
How do I get it running in ATAS?
After checkout we grant it to the ATAS account email you gave us, usually within a few hours. Then activate it once in ATAS: gear icon (top right) → Custom Modules → expand Available modules → activate. It then sits in your indicators list, ready for any footprint or cluster chart.
Can I use it on more than one computer?
Yes, access is tied to your ATAS account, not a machine, so it follows your login across your own devices.
THE COMPLETE FOOTPRINT LAB COLLECTION

Order Flow Suite

20 order flow indicators.
One complete toolkit.

Bring momentum, absorption, reversals and price structure into your analysis. Get Volume Sequencing alongside the complete collection, with every future release included.

Order flow toolsIncluding all five new releases
  • Lifetime updates
  • Product guides included
  • Future releases included
YOUR COMPLETE TOOLKIT$499.90

One-time purchaseNo subscription

Bought individually: $1,198.00Save $698.10
Explore the Suite

Find the tools that fit
the way you read the market.

Ready when you are.

One payment, yours for life. Lifetime updates and a PDF guide included, no subscription.

Volume Sequencing / ATAS

Chart example

Volume Sequencing marking an entry zone from one-sided aggression on an ATAS footprint chart
1 / 2

Original ATAS capture. Other visible chart studies are context; the image is an example, not an expected trading outcome.